BMA-CT | 910-3200-205-I

BMA-CT

Art.-Nr.: 910-3200-205-I

Request now Project consulting

ClearOne is a global company that designs, develops and sells conferencing, collaboration, and network streaming & signage solutions for voice and visual communications. The performance and simplicity of its advanced, comprehensive solutions offer unprecedented levels of functionality, reliability and scalability.

Overview

Ceiling Tile Beamforming Mic Array

The BMA CT is a patented ceiling tile beamforming mic array that blends in perfectly with today’s drop ceilings.

Built in acoustic echo cancellation, noise cancellation, and beam selection eliminate the need for per-beam processing in a DSP mixer — requiring fewer DSP mixer resources.

Built in 2x10 Watt into 8-ohm power amplifier conveniently drives loudspeakers.

Product Details

Ceiling Tile Beamforming Mic Array
Enables multi-array setups that can utilize a single low channel count DSP mixer.
Daisy chain ceiling tiles via P-Link for larger conference setups – for simpler wiring and longer distances compared to networked “home run” connections.
Use P-Link to daisy chain additional peripherals such as wireless mics, USB Expanders, and GPIO Expanders.
Each ceiling tile microphone array supports long distance P-Link mode with 200 meters between tiles, for a total cable reach of 600 meters
Built in 2x10 Watt into 8-ohm power amplifier conveniently drives loudspeakers.
Integrated features can significantly reduce system design complexity, simplify installation, streamline configuration and programming, consume less rack space, and lower cost.
Adaptive steering (think of it as smart switching) - no need to adjust individual beams - for impeccable room coverage.
ClearOne’s BMA technologies are protected by at least a dozen patents and pending patent applications.
Supports three different ceiling grid types: 24-inch for US, 600 mm, and 625 mm for international.

24 Microphones

1 Channel In (Uses P-Link channels or C-Link channels for speakers, no input channels in CP2)

Two patterns, either 5 or 6 beams

Custom

150Hz – 16kHz, +/- 3dB

150Hz – 16kHz, > 70dB

Amplifier Output

5.08mm Black Header, Male, Phoenix type Euroblock

2 Channels

2x10W Max, 8Ω load

20Hz – 22kHz @ +10dBu, +/- 0.5dB

20Hz – 22kHz @ +10dBu, 1W, < 0.2%

20Hz – 22kHz @ +20dB, > 102dB, with 20kHz digital low pass filter

Channel to Channel, stimulus at +20dBu to receptor 10W output 8Ω load, 20Hz – 22kHz, < 60dB

LED

Mute/Un-mute configuration with 8 color options, two blink patterns and warning indications

Configuration

enable/disable

on/off

All Pass, Low Pass, High Pass, Notch, PEQ

on/off

adjust

on/off

auto /manual

P-Link Peripheral Bus

Proprietary Network

RJ-45

RJ45 Cat5e, Cat6, Expandable

Up to 198 m

Up to 3 Array units and additional P-Link compatible devices with each supported CONVERGE Pro 2 unit in the same chain; Up to 6 Array units in the same chain with 2 supported CONVERGE Pro 2 units connected through C-Link

Increases P-Link distance from 200 ft. to 650 ft.; (200M) max cable distance between any two units; Cat6, 550 MHz, 23 AWG, solid conductor cable; Do not use Copper Clad Aluminum (CCA) cable

Power Selection Switch

Slide Switch: Slide toward P-Link to power device by P-Link; Slide toward PoE to power device by PoE Injector

Configuration & Administration Software

Pro CONSOLE® Software

Mounting

Drop in replacement for 24 inch, 600mm, or 625mm ceiling tile

Power & Thermal

PoE

RJ-45

PoE Injector or equivalent

IEEE802.3at compliant devices providing 56V and 640 mA (36 W); P-Link In - Mode B; PoE In - Mode A and Mode B (Each BMA CT requires its own 802.3at compliant power injector if loudspeakers are being used.)

100-240VAC, 50/60Hz; 9.1 Watt Typical without speaker amp; 38W at max power 1kHz (2 x 10W)

130 BTU/Hr at max power

14° F/-10° C to 104° F/40° C ambient temperature

General

602.5 x 602.5 x 54.1mm

592.5 x 592.5 x 54.1 mm

3.5kg

5.2kg